Welcome Back! In our next installment of Fall variations of our Starling Dress, I took
a cue from Charlotte to use another perennial autumn classic--plaid.
I originally intended to purchase some plaid fabric, but was thoroughly let down, again, by our local fabric store (a national chain who shall remain nameless). So I returned home and rummaged through my collection.
If necessity is the mother of invention, then I am pleased to report that desperation is similarly advantaged. In the corner of my workroom I spied a plaid skirt cut on the bias that I picked up at a thrift store on a whim some time ago. Not only did this size 18 skirt yield sufficient yardage to cut out the dress, I salvaged the invisible side zipper to use as well. Total investment: $2.50.
The design inspirations for my Refashioned Starling are (1) the Coffee Date Dress by the
--which has a wide zigzag ruffle cascading from the neckline, and (2)
from Bonpoint, which looks so cozy with the turtleneck underneath:
To construct this version of the Starling Dress, I eliminated the vertical front placket and side ruffles and added the zigzag ruffle at the top of the yoke. The adult version of the Coffee Date Dress calls for a 6"x36" strip of fabric folded in half lengthwise. For this pint-size version, I narrowed the ruffled strip to 4" wide and cut it to 24" in length. After ruffling the strip using a basting stitch, I sewed it into the seam joining the yoke to the lining yoke. Next I followed the same basic pattern of the Coffee Date Dress to arrange the next two layers of the ruffle. After machine stitching these layers in place, I tacked down the ruffles to the front of the dress with a few hand stitches to make sure they didn't flip up during wear.
Ruffle up close:
[By the way, the complete pattern & instructions for the Coffee Date Dress, including the ruffle, can be found here].
So, here's a shot of the original skirt before:
Molasses cookie bribe for cooperation with photography: